Subscribe by Email

Your email:

Follow Us

Posts by category

Blogging about Remotes And Keys

Current Articles | RSS Feed RSS Feed

Chrysler Crossfire Remote Key Resynchronization


Chrysler Crossfire switchblade remote key starts the engine but the remote doesn't work.

The switchblade remote key can lose it's synchronization if the buttons are pressed too many times when not in range of the vehicle.  If this happens the solution is to simply resynchronize.
  1. Insert key into ignition.  Don't turn it.
  2. Press the lock button on the switchblade remote key twice in 2 seconds.
  3. Turn the key to ON or RUN within 30 seconds.
  4. Take the key out.  Exit vehicle and have the doors closed.  Test the remote.

Chrysler Crossfire Chrysler Crossfire Flipkey


Order a Chrysler Crossfire Flipkey


Hou i get the key
Posted @ Monday, May 12, 2014 3:03 PM by Adolpho rodriguez
Adolpho, if you are the registered owner of the car and the key will be shipped to the address on the registration then you can go to this web address to order one:
Posted @ Monday, May 12, 2014 3:17 PM by Tech Support
Post Comment
Website (optional)

Allowed tags: <a> link, <b> bold, <i> italics


No liability for the use of advice and information are assumed whatsoever for any costs, claims or damages filed for or caused by correct or incorrect use of the information provided.  We cannot and are not responsible for any type of damage, intentional or otherwise, caused by the use of this information.  We are not responsible for any type of harm, whether physical or otherwise, due to correct or incorrect use of the procedures,techniques, or advice provided.