Share

Thursday, March 10, 2016

[Remote of the Day] Code Alarm CATX9000 (FCC ID: H5OT36)

CATX9000 1 way transmitter
CATX9000
The FCC ID is H5OT36and the code alarm part number is CATX9000 .  
It works on these Code Alarm systems: SRT9000.
In order to complete the programming of new remotes, it helps to have a valet switch installed with the system.  If not it is still possible but you'll need to access the receiver under the dash.  Here is an article addressing programming without a valet switch.
If you already ordered a remote elsewhere and it didn't come with instructions you can get them here.
Using Valet Mode:
To engage valet mode:
Turn the ignition key to the on position. Press and hold the emergency override button. The blue dashboard mounted LED will light solid indicating that the system is in valet mode.  When valet mode is activated the dash mounted status LED will light solid, and all security functions will be disabled. 

To disengage valet mode:
Turn the ignition key to the on position.  Press and hold the emergency override button. The blue dashboard mounted LED will turn off indicating that the system has exited valet mode.  When the valet mode has been deactivated the dash mounted status LED will turn off and all security functions will be enabled the next time the system is armed. 

Using your Remote Vehicle Starter:
To activate the remote start:
Press and release the Star button on the remote 2 times within 2 seconds.  If your vehicle does not start, the system will pause 3 seconds, then try 2 more times to start the vehicle (a total of 3 attempts). The system will pause 3 seconds between each start attempt. If the vehicle does not start after the 3rd attempt, the system will abort the remote vehicle start process. 

To turn off the remote start:
Press and release the Start button on the remote 2 times within 2 seconds. 
Entering the Vehicle while it is running via Remote Start:
Unlock the vehicle's doors.  Enter the vehicle. Do not press the brake pedal.  Insert the key into the ignition switch and turn to the on position.  Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally. 

Preheating or Precooling the Vehicle's Interior:
Before exiting the vehicle, set the temperature control to the desired setting and operation.  After the system starts the vehicle, the heater or air conditioning will activate and heat or cool the vehicle's interior to your setting.
Using the "Quick-Stop" Feature:
If you want to make a short stop and keep your vehicle running, the quick-stop feature allows you to do this while keeping your vehicle secure and your keys with you.
To engage quick stop:
Stop the vehicle and place the transmission in Park. With your foot off the brake pedal, press and release the Star button on the remote control 2 times within 2 seconds. The parking lights will turn on. Remove the keys from the ignition and exit the vehicle.  Press the Lock button on the remote to lock the doors if desired. Note: Do not leave children or animals unattended in the vehicle when using the quick-stop feature.
Operating the 1 / 2 / 3 Hour Start Up Timer Mode:
The system has the ability to start the vehicle every 1, 2 or 3 hours with a maximum of 6 cycles. The system also has the ability to monitor temperature and only start during 1, 2 or 3 hour times if the temperature falls below a preset mark. The temperature and hours must be selected in options programming, see your installation center for details.
To begin the start up timer mode:
Turn the ignition key on then off and within 15 seconds, scroll to vehicle Menu 5 and select Timer Start.  Or, turn the ignition key on then off and within 15 seconds, press the Trunk then Star buttons.  The parking lights will flash and the siren will chirp 3 times indicating timer start is active.  The vehicle will start every 1, 2 or 3 hours and run for the preset time and then shutdown. This will continue for 6 cycles or unless the timer start is cancelled. To cancel the start up timer mode, start the vehicle with the ignition key.

Operating the Daily Start Timer:
The system has the ability to start your vehicle based on a preset time entered into the transmitter. Prior to activating this feature it will be necessary to enter the desired start time in the Menu. The daily start timer will only start the vehicle once per activation.
To activate the daily start timer when you have finished using the vehicle for the day:
Turn the ignition on then off. Within 15 seconds, scroll to vehicle menu 5 and select Daily Start.  The parking lights will flash and the siren will chirp 6 times.  To cancel daily start, start the vehicle manually.  
Using the Safety (Red Handled) Control Switch:
The safety control switch allows you to temporarily disable the remote vehicle starter feature.
To disable the remote start:
Move the safety control switch to the off position.  
Remote Start Safety Features:
For safety and security reasons, the system will shutdown or prevent the remote vehicle starter from activating if any of the following occur:
The vehicle's hood is open.
The brake pedal is depressed prior to turning the ignition key to the on position.
The engine reaches 3 times its normal idle speed.
The safety (red handled) control switch is moved to the off position.
Using the Optional Turbo Timer Feature:
Multiple Vehicle Operation:
1-Way Remote Control Transmitter: The 1-way remote transmitter can operate up to 2 vehicles, the additional vehicle must also have this system installed and the transmitter programmed to it.
For 2nd vehicle operation:
Press the button, the LED on the transmitter will turn on for 3.5 seconds.
While the LED is on, press the desired button to control the 2nd vehicle.
Note: For the 1-way transmitter you will need to do step 1 each time you wish to use the transmitter with the 2nd vehicle.
Replacing Remote Control Batteries
1-way 5 Button Remote Control:
The two 3 volt lithium batteries inside the remote control should last approximately 1 year under normal use. When
the battery becomes weak you will notice the remote control range (the distance from the vehicle the remote
control will work) deteriorate and the small LED on the remote control will dim. To replace the remote control
batteries:
1. Using a small (#1) philips screwdriver, remove the screw from the back of the remote control.
2. Gently unsnap the halves of the remote control apart.
3. Slide the batteries out of the circuit board, observing the +/- symbols on the batteries and replace with
new lithium 3 volt batteries.
4. Gently snap the halves of the remote control back together and reinstall the philips screw on the back
of the remote control.
5. Test the operation of the remote control.
If you already ordered a remote elsewhere and it didn't come with instructions you can get them here.
Code Alarm Remote CATX9000 H5OT36

No comments:

Post a Comment

Labels

10178734 (1) 10245950 (1) 10245951 (1) 10245952 (1) 10245953 (1) 10246215 (1) 10246216 (1) 10269729 (1) 2-way (1) 22100943 (1) 22100944 (1) 22100945 (1) 22100951 (1) 22110689 (1) 28268-4Z400 (1) 28268-8S200 (1) 28268-ZE10B (1) 28268-ZT04B (1) 465T (1) 471C (1) 471T (1) 474P (1) 474T (1) 491C (1) 491T (1) 492C (1) 492T (1) 5909874 (1) 692353 (1) AB00702T (1) ABO0204T (1) ABO0502T (1) acadia (1) alarm remote (1) alarm transmitter (1) automate (1) B23AT54 (1) battery (1) Buick Reatta (1) Buick Riviera (1) cadillac (1) Cadillac Eldorado (1) car fob (1) car key (1) car remotes (1) case (1) catalog (1) change batteries (2) changing battery (2) Chrysler Sebring (1) code alarm (1) cover (1) cts (1) Dodge Stratus (1) ELVAT5H (2) elvat5h key fob (1) elvat5h keyfob (1) elvat5h remote (1) elvat5h transmitter (1) entry (1) equalizer (1) escalade (1) EZSDE1471 (1) EZSDEI467 (1) EZSDEI471 (2) EZSDEI474P (1) EZSDEI490 (1) EZSDEI491 (1) find valet button (1) find valet switch (1) fob (1) GLQ9Z6-1507 (1) gm (1) gm advanced remote start (1) gmc (1) H5LAL777A (1) how to (3) how to use (1) Infiniti FX35 (1) Infiniti FX45 (1) jacket (1) KARR (4) karr alarm remote (1) karr remote (1) karr transmitter (1) KBRASTU15 (1) key fob (1) keyfob (3) keyless (1) keyless entry remote (1) keyless remote (2) keyless transmitter (1) NHVBU427 (1) Nissan Armada (1) Nissan Pathfinder (1) Nissan Quest (1) Nissan Sentra (1) Oldsmobile Toronado (1) pod key (1) Prestige (1) programming button (1) Python (2) quiz (1) rattler (1) Regular Remote (1) remote (3) remote battery (2) remote control battery (2) remote cover (1) remote head key (1) remote key (1) Remote of the Day (1) remote start (2) remote tote (1) remotes (1) remotesandkeys (1) replace case (1) replacement car key (1) replacement car remote (1) replacement case (1) replacement key fob (1) replacement keyfob (1) replacement remote (1) rubber (1) shirt (1) sidewinder (1) silicon (1) silicone (1) srx (1) sts (1) Suzuki Esteem (1) Suzuki Grand Vitara (1) Suzuki Sidekick (1) Suzuki Swift (1) Suzuki Vitara (1) Suzuki X-90 (1) test (1) transmitter (2) Transponder Key (1) tutorial (1) Valet (2) valet button (2) valet button location (1) valet switch (2) valet switch location (1) viper (1) wasp (1) xlr (1) XT-54A (1) Y165PT (1) Y170PT (1)